• Large “Wide Box” (57” W x 64” or 80” L), clear opening with standard tongue and groove floor, ideal for both post-Industrial cardboard and scrap metals, while easily processing paper, fiber, plastic and other recyclables.
• Interlocking plate steel construction distributes stresses away from welds to tabbed locking joints.
• Chassis floor and sides constructed of seamless single sheet plate steel.
• Replaceable “AR” hardened wear liners allow for limitless replacement of all chassis wear surfaces for years of reliable service.
• Multi edge replaceable shear blades reduce cost by allowing blade rotation to gain additional new cutting edges before blade replacement. Extended progressive cutting profile shears material over a long distance effectively reducing shear jams.
• 400-600 gallon floor mounted hydraulic oil reservoir shipped full of oil.
• Clogged oil filter sensor, high oil temp sensor and low oil level sensors automatically protect your investment while notifying the operator attention is needed.
• Robust ram and door position transducers allow automatic control of bale size, final bale finishing, shear jam prevention, wire placement and bale ejection.
• Bale separation door facilitates instant material changes and virtually eliminates cross contamination between bales. The door’s transducer positioning allows up to 13” oversized bales to eject without jam, yet closely guides the bale to the tier for tight bales and reduced fall-off.
• All safety E-Stops and contactor resets monitored by a dual redundant safety relay system.

• Large “Wide Box” (57” W x 64” L), clear opening with standard tongue and groove floor, ideal for both post-Industrial cardboard and scrap metals, while easily processing paper, fiber, plastic and other recyclables.
• Interlocking plate steel construction distributes stresses away from welds to tabbed locking joints.
• Chassis floor and sides constructed of seamless single sheet plate steel.
• Replaceable “AR” hardened wear liners allow for limitless replacement of all chassis wear surfaces for years of reliable service.
• Multi edge replaceable shear blades reduce cost by allowing blade rotation to gain additional new cutting edges before blade replacement. Extended progressive cutting profile shears material over a long distance effectively reducing shear jams.
• 400 gallon floor mounted hydraulic oil reservoir shipped full of oil.
• Clogged oil filter sensor, high oil temp sensor and low oil level sensors automatically protect your investment while notifying the operator attention is needed.
• Robust ram and door position transducers allow automatic control of bale size, final bale finishing, shear jam prevention, wire placement and bale ejection.
• Bale separation door facilitates instant material changes and virtually eliminates cross contamination between bales. The door’s transducer positioning allows up to 13” oversized bales to eject without jam, yet closely guides the bale to the tier for tight bales and reduced fall-off.
• All safety E-Stops and contactor resets monitored by a dual redundant safety relay system.

Maren Balers have long been regarded the standard of the box, printing, and process industries.

The Maren ProPAK-A SERIES take that standard to an even higher level. These balers are built specifically for the difficult duty cycle required in corrugated box, folding carton, printing, converting, envelope and tissue industries. If you run a high volume operation and things like bale weight, up time, durability, safety, serviceability and cleanliness keep you up at night take a good look at the Maren ProPAK-A SERIES.

With multiple horsepower options and several hopper sizes to choose from these workhorse’s fulfill virtually any production requirements.

Maren Floor Sweep Shredders offer an economical solution to process and pre condition for baling a wide variety of paper waste materials including; corrugated sheets and trim, signatures, die cuts, folding carton scrap and much more……

Maren Floor Sweep Shredders Offer:

• Safe Operation
• Low RPM
• Fast, Easy Blade Replacement
• Easy Adaptation to Air Conveying System
• Completely pre-wired for easy installation

Maren Floor Sweep Shredders are designed to easily integrate as part of a new or existing pneumatic scrap handling system. The Floor Sweep Shredder is available in 24”, 30” or 36” widths.

Designed and engineered for the destruction of:

• Magazines
• Signatures
• Paperbacks
• Tab Cards
• Computer Printouts
• Coupons
• Blank Notes
• And a variety of other materials

Maren Pinch Conveyor Shredders are engineered and manufactured to shred a wide variety of wastes including; corrugated sheet waste, set-up box’s folding carton scrap, paper cores, roll slab and much more.

Maren Pinch Conveyor Shredders offer more built-in features than the competition

• Quiet Safe Operation
• Fast, Easy Blade Replacement
• Arbor Speed Sensor to prevent over feeding
• “V”-grove belt tracking
• Automatic Pinch Action
• Completely pre-wired for easy installation

Maren Pinch Conveyor Shredders are designed to easily integrate as part of a complete pneumatic scrap handling system. Other configurations are also available including; piggy backed over a horizontal baling press, mounted directly over trash compactor or in-floor pit.

Maren 122 Legacy Series Closed Door Balers are the first designed specifically for baling of Chipboard, Boxboard, Folding Cartons and Waxed or Coated materials.

The Maren 122 Legacy Series Closed Door Baler produces “Mill Size” bales generating maximum revenue for your recycled product and a quick return on investment.

The vault-type discharge door and heavy-duty locking mechanism will easily withstand the forces generated by baling – up to 96,000 pounds of thrust – without warping or torquing. All moving parts are completely enclosed for safe operation.

Maren 122 Legacy Series Closed Door Balers can be used in conjunction with pneumatic conveying systems, belt conveyors or feed chutes

A photo-electric eye in the hopper controls the baling operation. When the light beam is blocked by material, the baling cycle automatically starts and continues until the light beam is no longer blocked. The baler will not operate unless the hopper is filled. A buzzer sounds to alert the operator that the bale is complete. An operator is only needed to release the door, tie off and handle the bale—a part time job.

Take the guesswork out of your baling operation with Maren’s ProPAK60 Full Eject Balers with exclusive Smart Bale Technology. Color touch screen alerts the operator when it is time to tie off the bale and leads them through the bale completion, tie and eject steps as well as how many bale ties to use and the proper position for the ties. Each material recipe has unique bale tie count and placement parameters that only need to be put in once…. it’s nothing less than the smartest of its class!

With Full Eject, the chamber is cleared after each bale is made, so switching to another material does not require shutting down, cleaning out or making unwanted contaminated bales from the previous material.

• Largest Hopper Opening of its Class
• Highest Ram Face Pressure of its Class
• Most Durable Baler of its Class
• Exclusive Smart Bale Technology