Combination Belt Conveyors are heavy-duty conveyors that feature a chain drive system incorporated with a rubber belt for medium to high volume applications ranging from 5 to 30 tons/hour.

Features

• Inclines – 30° & 35°
• Cleats – Variable
• Configuration – A, B, C, D
• Nose Overs – Horizontal or 10° / 15° Down
• Applications – Above and below grade

Trough Conveyors are designed to convey material at a higher speed. The rubber belt rides on angled rollers or idlers that form a trough. They can be used for light to medium duty baler, compactor and shredder feed systems.

Features

• Belt Weights (lbs) – 220, 330
• Belt Widths (inches) – 24, 30, 36, 42, 48, & 60″
• Troughs – 20° & 30°
• Configuration – A, B
• Speed – Variable

Apron & N-Pan Belt Conveyors are for the most demanding, high impact heavy-duty operations such as transfer stations, scrap, MSW and C&D lines, mixed waste lines and abrasive materials (20 to 50 tons/hour). Features include: Apron Pan or N-Pan, 6” and 9” pitch, 7.5 to 25 HP motors, tapered roller bearings, pit covers and variable speed controls.

Features

• Inclines – 30° & 35°
• Configuration – A, B, C, D
• Nose overs – 10° / 15°
• Applications – Above and below grade

Sliderbed Conveyors are friction driven conveyors with a belt supporting bed for low to medium volume bulk material handling applications (2 to 15 tons/hour). These conveyors can be used for baler and compactor feeds, sorting lines, and components of a MRF system.

Features

• Belt weights (lbs) – 160, 220, 330
• Belt widths (inches) – 24 – 72″
• Inclines – up to 35°
• Cleats – Variable
• Configuration – A, B
• Applications – Above and below grade

Hinged Steelbelt Conveyors are medium to heavy-duty applications such as pre-crusher
or compactor feeds, paper, solid waste, large scrap baler feeds, mixed waste lines and white goods. Each joint has a tapered roller and chain that rides on a track driven by 5 to 25 HP motors.

Features

• Inclines – 30° & 35°
• Cleats – Variable
• Configuration – A, B, C, D
• Nose Overs – Horizontal or 10° / 15° Down
• Applications – Above and below grade

Side Eject Horizontal Balers are designed for applications requiring multi-material capability, and medium throughput capacity where space is limited. The Side-Eject Horizontal Baler ejects the bale perpendicular to the baler utilizing the patented Bale Server Island. The server island fully ejects the bale and positions it to be easily picked up by a forklift or pallet jack.

Marathon’s Gemini Series Horizontal Balers are moderate-duty, closed-end horizontal balers that enable you to process a variety of materials such as PET, aluminum or steel cans, paper, plastics, OCC, newsprint, and much more.

Closed-End Horizontal Balers are ideal for multi-material processing. The ram packs the material in the compaction chamber and the bale is ejected through the end. The gate operates hydraulically. Closed-End Horizontal Balers are mid-sized, closed-end balers that processes a wide variety of material and can produce up to 20 tons of OCC in a typical day’s shift. Several models are available with bale sizes from 30″ x 42″ x 72″ to 48″ x 42″ x 72″, charge box opening lengths from 30″ to 50″, motors with 20 and 30 horsepower, and 7-inch and 8-inch cylinder bores.

Marathon’s TIEger® Auto-Tie Horizontal Baler uses highly efficient gear twisters, which eliminates pigtails. This accounts for more than 10% reduction in wire consumption and related costs. The gear twisters and inserter needles are hydraulically driven and wire is dispensed directly from our unique box holders. Hydraulic wire positioners precisely align the wires for pick-up by the inserter needles, making the TIEger® the most reliable tier on the market.

Marathon auto-tie balers are designed for high productivity and ease of use with advanced electronics, such as the Allen-Bradley MicroLogix 1500 PLC and Maestro® color touch-screen operator interface. From this interface, the operator can control a variety of baler functions such as auto and manual modes, bale settings, system pressure, bale length, and perform computerized diagnostics. The main panel box features IEC controls.

Our Atlas® ET (Extra Tough) offers affordable, highly efficient, mid-size horizontal balers for non-ferrous scrap. With heavy duty and stress-engineered construction, the Atlas offers a superior size to weight ratio to meet the demands of scrap baling applications. The specially designed bolt-on and replaceable body and ram shear blades provide optimum performance and ease of maintenance which eliminates precutting of most materials.

The Atlas® ET features 400F liners and S-7 hardened steel ram and body shear blades for even tougher application requirements.

Facilities baling from one to three tons of aluminum and steel cans, aluminum and copper wire, aluminum siding, extrusion, and radiators are reaping big benefits from the Atlas Non-Ferrous Baler.

Galaxy2R wide model balers feature a multi-purpose door that can serve as a bale separator, bale release, or bale clamp. It also allows for variable bale widths. This line of balers also comes with components such as a high-efficiency power unit, adjustable shear beam, replaceable and reversible shear blades, and main ram and ejector ram laser positioning.

Galaxy2R narrow horizontal balers feature a multi-purpose door that can serve as a bale separator, bale release, or bale clamp. It also allows for variable bale widths. Galaxy2R narrow model balers also come with components such as a high-efficiency power unit, adjustable shear beam, replaceable and reversible shear blades, and main ram and ejector ram laser positioning.